Back to Fact-Link's Top Page > Machine / Tools Trading > PT. OKAYA INDONESIA
PT. OKAYA INDONESIA
Sale of Machinery, Tools, Steel, Non-ferrous metals, Chemical products, Piping, Food product

Spot Cooler

​SUIDEN

Stop unnecessary spending on expensive central air conditioning

Save money on both initial investment and then every day on lower

Strategically place spot coolers only where needed.

 

■ Introduction

SUIDEN Spot Cooler is used in various places and purpose. Mechanism of spot cooler is compressor-based refrigerant system that uses air to exchange heat, in the same way as a car or typical household air conditioner.
PT. Okaya Indonesia sell and support of product SUIDEN Spot Cooler in Indonesia.
 

■ Mechanism of Air Flow


 Adjustable cool air duct

300° swing range, Flexible ducts

 Exhaust air duct

the both ducts can extends up to 550mm but the dimensional tolerance is ±20mm by individual difference

 Mini drain tank

The latest mechanism with integrated heat exchanger.
The amount of drain water has decreased dramatically!
Since it is a semi-transparent drain tank, you can see the remaining amount of drain at a glance.

 Space saving

It can be effectively used even in a limited work space!

* The image is an image when using 3 units.

Uses a fully closed motor that is resistant to dust

Since the structure does not allow the air around the motor to flow into the motor, it can be used even in dusty sites.

Convenient drainage function

You can drain directly by taking out the drain tank and inserting a hose into the drain port.

* Please prepare a hose with an inner diameter of Φ16 mm.

 Extension of cold air, outdoor exhaust

By adopting a sirocco fan for the cold air fan and exhaust fan, the duct can be extended to carry the cold air to a person far away and exhaust heat can be exhausted to the outside.

* Optional extended cold air duct and extended exhaust duct are required.

 Automatic swing cooler

Sends a cool breeze over a wide area.
Swing 45 ° to the left and right around the front of the duct.

​* This is a function only for D type.

 

■ Usage Example

Warehouse

Ironworks

Assembly line

 

■ Product Information

 

 

SS-22EG-8B / SS-22DG-8B

 For one person

Model number

SS-22EG-8B SS-22DG-8B
Automatic swivel No Yes
Power supply Single phase 220V, 50Hz
Cooling capacity 2.2kW / 7,500BTU
Compressor / output Air tight rotary model / 0.70kW output
Air Flow Power output 200W
Cool air volume 5.1m/min(Strong) - 4.9m/min(Weak)
Hot air volume 9.8m/min
 Dimensions (mm) W390×D430×H808 (Not including hot / cold air ducts)
Operating condition 25℃(50%) - 45℃(40%)
Drain tank capacity 5L
Electric cable length 2 m (without Plug)
Power consumption 0.80kW Next weight 39kg
Starting current 15.5A Running current 3.8A
Refrigerant R407C Refrigerant charge 380g
Power factor (P.F.) 96% Remark All values are measured during operation in 35℃ / 60% humidity

 

SS-40EG-8BII / SS-40DG-8BII

 For two people

Model number

SS-40EG-8BII SS-40DG-8BII
Automatic swivel No Yes
Power supply Single phase 220V, 50Hz
Cooling capacity 4.0kW / 13,500BTU
Compressor  / output Air tight rotary model / 1.1kW  output
Air Flow  Power output 135W
Cool air volume 10.5m/min(Strong) - 9.6m/min(Weak)
Hot air volume 19m/min
 Dimensions (mm) W520×D470×H1120 (Not including hot / cold air ducts)
Operating condition 25℃(50%) - 45℃(40%)
Drain tank capacity 8L
Electric cable length 2 m (without Plug)
Power consumption 1.90kW Next weight 73kg
Starting current 40.0A Running current 8.9A
Refrigerant R407C Refrigerant charge 660g
Power factor 97% Remark All values are measured during operation in 35℃ / 60% humidity

 

SS-56EG2-8B

 For three people

Model number

SS-56EG2-8B
Automatic swivel No
Power supply Single phase 220V, 50Hz
Cooling capacity 5.6kW / 19,000BTU
Compressor  / output Air tight rotary model / 1.50kW  output
Air Flow  Power output 0.48kW
Cool air volume 16.0m/min
Hot air volume 30.0m/min
 Dimensions (mm) W490×D600×H1120 (Not including hot / cold air ducts)
Operating condition 25℃(50%) - 45℃(40%)
Drain tank capacity 20.0L
Electric cable length 2 m (without Plug)
Power consumption 2.80kW Next weight 90.0kg
Starting current 57.0A Running current 13.4A
Refrigerant R407C Refrigerant charge 950g
Power factor 95% Remark All values are measured during operation in 35℃ / 60% humidity

 

■ Spot Cooler Accessories

Please contact us PT. Okaya Indonesia for further information and inquiries for this Suiden Spot Cooler product.

 

For further information and inquiries,
Contact our Cutting Tools and Equipment division :

Deltamas office: +62 21 2909 3861
Mr. Miyake  email: miyake@okayajkt.co.id
Rinaldi  email: rinaldi@okayajkt.co.id
Ficky  email: ficky@okayajkt.co.id
Kuswantoro  email: kuswantoro@okayajkt.co.id
Viola  email: viola@okayajkt.co.id

 

Latest Update 09 Dec 2024
Powered by Fact-link.com
Back to Fact-Link's Top Page